Win pvr for vista

If you click on it you should be able to open the WinTV programs. Is this installed and does it function properly? If the software is installed but you are unable to open or control the WinTV software with the remote control, the device may need to be reset. Recycle the power to it by unplugging the unit from the power cable for a few seconds then re-plugging it.

If you are still unable to use the remote control, this may be a hardware problem and would require repair of the device. Please contact our Tech Support Dept at techsupport hauppauge. Download Prodinfo. The driver for the device must be installed in order to run Prodinfo. A Pentium II Mhz minimum is required. If it is, unplug the power from the unit and restart the computer. Upon reboot, plug it in again and try WinTV again. If the Hardware Wizard detects the device, continue the installation of the drivers using the supplied installation CD Rom.

If the hardware wizard does not detect the device, there may be a problem with the hardware. If you get the same problem, the hardware may be defective and require repair. Contact Tech Support for more information. Bonzi Buddy 1. TeamViewer Windows Server Service Pack 2 xbased bit download Freeware. Minecraft 1. Hotspot Shield Vivaldi for Windows 32 5.

RealPlayer Airytec Switch Off Portable x64 3. Windows 7 download Trialware. Top Rated Torrent Captor 3. Base64 Tools 1. MTools Enterprise Excel Tools 1. Startup Product Manager 7. The Enigma Protector 6.

ConsoleHoster 4. JavaExe 3. Rista Web Browser 5. SoftPerfect Bandwidth Manager 3. RapidTyping 5. ECTcamera 2. SoftPerfect File Recovery 1. Such recordings are stored usually in the transport stream format ts or in a kindred format. If you can record and playback a VCD file, then the problem would indicate a Conflict with pre-installed decoders. It will use software decoding for the playback and pause functions.

Local playback on the PC monitor is still software decoding. EXE listing under Image Name. Right click on it and choose Set Affinity. In here it will list the active CPUs. Uncheck the highest number CPU. Microsoft is aware of these types of issues with capture devices. If you would like to read the Microsoft Knowledge base article concerning the hyper-threading fix you can click the following link. There should be a fix for this in Service Pack This should only be tried as a last resort.

Initial installation was smooth, and finished without any problems. WinTV and all of its functions work fine until the system is rebooted. When windows comes up again, it recognizes the card as a new device and must be reinstalled in order to work again.

Windows will detect the card when you reboot and should reassign the resources for it. Both models will have the same capture and TV functionality. To access that option, click and hold right mouse button then go down to video out and uncheck Local Playback. You can also turn off Video Out in the same menu selection. This error will occur if Overlay is not working properly on your system. Make sure your graphics card supports Overlay. Also make sure that there are no other programs running that require overla, ie; Windows Media Player.

This error may also come up if the Software Decoders have not been installed. Reinstall the software codecs. Also, be sure that the VGA cards hardware acceleration settings are on Full.